1958 CHEVROLET CORVETTE Assembly Manual Book Rebuild

Product Details

Please note this manual is a reproduction of a book that was used on the production line. The quality of the reprint is not as good as we would like, and can actually be poor at times, but it is the only assembly manual out there for this vehicle.

• Factory Authorized Reproduction
• Corvette
• approx 300 pages
• Assembly Manual
• Use to rebuild vehicle

Customer Reviews ::

1977 CHEVROLET CAR TRUCK Unit Repair Overhaul Manual

Product Details

This manual supplements the Service Manual to assist in major components that must be removed from the vehicle for service or repair. It explains how to disassemble, overhaul & reassemble major components.

• Slightly Used Original
• All Models
• approx 250 pages
• Overhaul Manual
• Unit Repair Manual

Customer Reviews ::

1996 BUICK RIVIERA OLDS AURORA Service Shop Manual

Product Details

Published by the factory to provide information on diagnosis, service procedures, adjustments & specs, there is none better. Loaded with diagrams & illustrations to help disassemble, repair & reassemble various components.

• Factory Authorized Reproduction
• Riviera, Aurora
• approx 3446 pages
• Body, Chassis & Electrical
• Wiring diagrams

Customer Reviews ::

1991 FORD LINCOLN MERCURY Emissions Diagnosis Manual

Product Details

Published by the factory to provide information on diagnosis, service procedures, adjustments & specs, there is none better. Loaded with diagrams & illustrations to help disassemble, repair & reassemble various components.

• Factory Authorized Reproduction
• All Models
• approx 6878 pages
• Emission Diagnosis
• 0

Customer Reviews ::

Argus BB-SBM12-PS Battery Bug Battery Monitor for Motorcycles and Power Sports

Product Details

Argus Analyzers Battery Bug Battery Monitor for Motorcycle is a full-time battery monitor that warns about the approaching battery failure. As the motorcycle or ATV starting battery gets older and nears its end-of-life, the battery bug alerts with an audible alarm that the battery should be replaced before it is too late. The patented Argus CrankCheck technology tracks the batteries health and predicts cranking failure. It features a LCD display that shows percent battery life remaining, present battery voltage, alternator/charging voltage, data from the battery's worst start and data from the battery's previous start. This monitor’s critical audible alarms indicates "low battery charge" and "replace battery now". It has six foot long straight wire leads for convenient mounting of the data display outside of the battery compartment. The cable termination is of 6mm ring terminal for the smaller power sport batteries. This monitor works with any lead acid engine starting battery.

• Helps prevent owners from being stranded by a dead battery
• Extends battery life by alerting users to damaging charge conditions
• Advanced CrankCheck technology tests battery health every time the engine is started
• Audible alarms and an easy-to-read LCD screen keep users informed of battery status
• Designed specifically for motorcycles, ATVs, jet skis and other power sport applications

You count on your vehicle's ability to crank every time, so don't get left in the dark by a dead battery. The Argus BB-SMB12PS Battery Bug Battery Monitor for Motorcycles and Power Sports uses advanced CrankCheck technology to test the health of the battery every time the engine is started, tracking the decay of cranking health over time. It clearly indicates battery health on the easy-to-read display, and audibly alerts you when performance begins to drop to dangerously low levels.

The Battery Bug is compact and easy to install.

Extend Battery Life by Avoiding Damaging Charge Conditions
It's a fact: any battery will naturally lose its charge over time, no matter if it's in your daily driver or a garaged beauty. Once fully discharged, a battery will start to permanently lose its overall capacity. This results in weaker performance, even when fully recharged.

The Argus BB-SMB12PS Battery Bug Battery Monitor for Motorcycles and Power Sports can significantly extend your battery's life by monitoring its charge level. Its on-board microprocessor continuously monitors decay in battery cranking performance and calculates your battery's total state of cranking health. It also monitors alternator and charger performance for damaging over-charge and under-charge conditions. If the battery reaches a low state of charge, the Battery Bug will sound an audible alarm indicating the need for recharge or replacement. Perfect for colder climates, the Battery Bug also measures battery temperature and adjusts the cranking state of health alarm for extreme low temperatures.

The display is easy to read and understand.

Intuitive Display and Alarms Provide a Clear Picture of Battery Health
The Battery Bug's information-packed LCD display shows critical battery health and performance information that's easy to read and understand. A graphical indication of cranking health remaining and the performance of the most recent engine start appear at the top of the display. Below that is a numerical gauge that shows cranking health remaining, battery voltage, and alternator/charger voltage. Low Battery and Replace Battery icons at the bottom of the display indicate what actions need to be taken when the audible alarm is active.

If the battery needs attention, the Battery Bug will alert you with its on-board audible alarm. The Low Battery alarm will sound when a chronic undercharge condition (below 12.1V for more than 30 seconds) is detected. An overcharge alarm will sound when the alternator or charger voltage exceeds 15 Volts. Finally, the Replace Battery alarm will activate if the cranking health of the battery drops below 10%.

Easy to Install in Any Vehicle
The Battery Bug for Motorcycles and Power Sports comes equipped with 6.4mm ring terminals that are optimized to fit motorcycle, ATV, jet ski, and other power sport batteries. The Battery Bug can also be attached to remote battery terminals without significantly affecting test results. It's engineered tough to survive the elements, and the 6-foot cable gives you the flexibility to place the display right where you need it. The Battery Bug consumes very little power--about the same amount as your vehicle's digital clock--and will not adversely affect battery performance. The Battery Bug can also be attached to two batteries in parallel, and the preferred installation is to attach it diagonally across the pack. The black wire should attach to the negative post at one end of the pack, and the red wire should attach to the positive post at the other end of the pack.

The Battery Bug is easy to reset as well, just disconnect one of its wires and the memory will be erased. It is recommended that you reset the Battery Bug if it shows the Replace Battery icon. If the Replace Battery icon illuminates again at the next attempted start, you can be confident that a battery replacement is justified.

Choosing the Battery Bug That's Right for You
The CrankCheck and charge level monitoring software embedded in the Argus BB-SMB12-PS Battery Bug Starting Battery Monitor for Motorcycles is designed specifically for motorcycles, ATVs, jet skis and other power sport applications. For cars, light trucks, emergency equipment, generators, and other starting batteries for engines typically larger than 1500CC, choose the Argus BB-SBM12 Battery Bug Starting Battery Monitor.

The Argus Battery Bug Deep Cycle Series is recommended for marine, RV, worksite, and other heavy-duty applications that involve deep-cycle batteries. Choose the BB-DCM12-300 for applications up to 300Ah, the BB-DCM12-150 for applications up to 150Ah, BB-DCM12-100 for applications up to 100Ah, or the BB-DCM12-90 for applications up to 90Ah.

Customer Reviews ::

Almost works as intended - Ernie - McDonough, GA
I purchased this item to use on my motorcycle (2009 KLR-650). All works ok except for when I crank my bike up the Argus BB SBM12 always shows a 0% cranking voltage(or batt. condition indication which indicates a dead battery). This happens everytime I start the bike. The batt. is about 8 months old and has been maintained properly. It cranks the bike over quickly and Ive never had a problem starting my bike. The voltage on the battery with the bike not running is 12.8V and shows 14.5V when running. I hooked up the unit to my lawn mower battery and the cranking condition shows to be at 80%(normal for a good batt.) with 12.6V when off and 13.3 V when running. I'm not sure why the Battery Bug Monitor is doing this, I suspect it is because my Bike starts up faster than the meter is able to read the cranking voltage drop across it. Any ideal will be welcomed... Yes I do like this meter and will use it anyway to keep an eye on my batt. charging voltage when riding it.

Lemur Vehicle Monitors LMAD-001 AlertDriver Wireless Vehicle Monitor

Product Details

Lemur Vehicle Monitors AlertDriver is a simple device to help drivers slow down. AlertDriver sounds a continuous beep while the vehicle speed is above 70 mph. Three warning beeps warn the driver when they exceed 35 mph. The user can also train the sensor to a custom maximum speed for continuous beeps. AlertDriver has a built in Tamper Alarm. For the first 24 hours after install, AlertDriver will sound an alarm each time the vehicle is started. Great device for parents of teens and managers of fleets. This will inform you if AlertDriver has been unplugged in the last 24 hours. Simple self install. Plug and play on any vehicle made since 1996.

• Speed alarm warns driver to slow down
• Continuous loud beep over 70 mph
• 3 warning beeps at 35 mph
• Set your own custom maximum speed for continuous beeps
• Tamper alarm if removed

Customer Reviews ::

Lemur Autovision TSDM-001 The Safe Driving Monitor

Product Details

Lemur Autovision The Safe Driving Monitor offers real-time driving feedback for parents of teens and business owners. It provides easy-to-read driving behavior trip reports on a key fob LCD. This monitor can be used by parents of teens as well as fleet owners/operators. The trip report is on the key fob to encourage open information and discussions between parents and teen drivers. This monitor saves money, both at the pump and in the garage. This is not a GPS unit and not a "spy" product. It encourages more attentiveness and safe on-the-road driving habits by making the driver accountable for their driving behavior. When the teen or employee returns with the keys, it reviews the data to ensure that they have driven safely. Knowing that their driving data (trip report) will be reviewed they drive more responsibly in the first place. Each trip report shows three critical pieces of information with a specific function which is maximum speed that helps to prevent excessive speeding, distance traveled which helps to prevent the extra vehicle use and sudden brakes to prevent the distracted driving and speeding on secondary roads. The trip report is PIN protected and can only be reset using a secret 4 digit PIN that the owner has selected. If the wrong PIN is entered TAMPER is displayed on the LCD. The Sensor is tamperproof, therefore if the sensor is unplugged from the vehicle TAMPER is displayed on the key fob LCD. The trip report is easily changed between imperial units (mph and miles) and metric units (km/h and km) with the press of a button. It is self-installed without tools in seconds by plugging a small sensor (included) into the OBD-II port. The OBD-II port is visibly located inside the vehicle under the dash in all cars, trucks and vans manufactured for 1996 or later. The sensor wirelessly transmits the collected data to the key fob to be displayed as the trip report.

• Provides parents of teen drivers and fleet managers with wireless driving data, in imperial (mph) or metric (km/h) units, that promotes safe driving habits, as well as improved gas mileage and lowered maintenance costs
• Tamperproof sensor and PIN-protected key fob ensure validity and security of sampled data
• Compatible with virtually any car, van or light truck manufactured for 1996 or later (with some exceptions), via OBD-II port under the dashboard
• Plug-and-play design requires no tools or computers to access data and allows for easy, quick setup and reset of the device for new drivers
• Features the ability to capture driving data automatically by attaching key fob to your car keys, or by synching with the sensor at the end of the trip

The Safe Driving Monitor is not a GPS unit, or "spy" device. Instead, it is a product designed to provide feedback on driving behavior. When used by new drivers, this feedback encourages open discussion and trust between parents and their teen drivers who have use of a car but may have yet to master the skills and disciple needed to be a safe driver. This feedback is also valuable in the workplace as a tool to reinforce good driving habits by those whose jobs require them to be behind the wheel while on the clock.  Use at work and at home. View larger. Why Monitor Driving Habits? Safe driving skills take time to learn and practice, and they need reinforcement to maintain. At a minimum, this means obeying posted speed limits and paying full attention to the road. The Safe Driving Monitor is designed to make the driver, regardless of age and experience, accountable for their performance and as a result, promote safe driving. When used properly, it will allow parents to know how their teen has driven. Employers and fleet managers will be able to monitor the way their vehicles are used, with an eye towards maximizing fuel efficiency and minimizing the cost of maintenance and potential traffic accidents. What Does It Measure? The Safe Driving Monitor concentrates on three critical metrics that can be recorded per trip or driver: maximum miles per hour, which might indicate a tendency for speeding; total distance traveled, which is part of the basis for determining fuel consumed by a particular driver; and the total number sudden braking events (speed reductions of 15 mph/25 km or more, in less than 2 seconds), which could indicate how much attention a driver is paying to conditions on the road. Speed, distance & braking measured wirelessly View larger. Installs and resets in minutes View larger. How Does It Work? The Safe Driving Monitor relies entirely on plug-and-play wireless technology to mine driving data, which means that it requires no tools or even a computer to use. The unit consists of two pieces: a sensor and a key fob. The sensor pulls data directly from your car via the vehicle's OBD-II port. The data is then sent wirelessly to the key fob, which displays the data. The key fob can be attached to the driver's keychain or stored elsewhere. An OBD-II, or "Onboard Diagnostics" port is a standard feature usually located under the driver's side of the dashboard on nearly all cars, vans and light trucks manufactured worldwide since 1996, so the Safe Driving Monitor enjoys nearly universal compatibility aside from a few exceptions.* Key fobs kept in the car register data in real-time and are updated every few seconds, while fobs not in the car can be synched after the fact when brought into range of the still attached sensor while the car is running. The unit also features fob PIN protection, additional security functionality that indicates whether the sensor has been tampered with, the choice of standard or metric data measurement, power supplied jointly by your car's engine and a standard CR2450 lithium battery, and simple, fast setup and reset procedures. Key Features: Wireless recording of trip data including maximum speed, total distance traveled and sudden braking incidences Users' choice of data viewing in standard or metric units Tamperproof and PIN-protected access, ensuring validity and security of data Compatible with virtually any car or light truck manufactured in 1996 or later (see exceptions*) Plug and play design allowing for easy setup and reset of the device No tools or computer connections required to view data The ability to capture data immediately by attaching key fob to your car keys, or pull it later by synching with the sensor at the end of the trip Unit Specifications: Power Requirements: Sensor: vehicle-powered 12V; Key Fob: CR2450 Lithium Battery (coin cell). Life 1 Year. Wireless Specs: Frequency: 433 MHz; Range: key fob will receive data wirelessly from sensor from anywhere within vehicle every 30 seconds. Key fob can also synched with with the sensor after the fact to receive data. Metrics            Maximum Speed: Sensor polls vehicle computer for speed approx. every 2 seconds.          Distance: Accurate within ±2%, polled every 2 seconds.          Sudden Brake: Increased if speed is reduced by 15 mph or 25 km in less than 2 seconds. Operating Temperature: Sensor: -22 ° to 140 °F (-30 ° to 60 °C); Key Fob: 50 ° to 95 °F (10 ° to 35 °C). What's in the Box 1-sensor unit with OBD-II connector, 1-wireless key fob. Warranty The Safe Driving Monitor comes with a no-risk, 30-day money back guarantee. If for any reason you are not completely satisfied with your purchase, you may return it to the manufacturer (Root Four Imagination) within the first thirty (30) days for a full refund; no questions asked. Regarding defects, unless otherwise specified, the manufacturer will accept defective products within one year of the original invoice date. (Product replacement, or repair and return at the discretion of said manufacturer) * Vehicles known to be incompatible include: 2002-07 Chevrolet Trailblazer (6-Cylinder), 2003-04 Chevrolet Optra, 1998-2004 Chrysler/Dodge Intrepid, 2001-06 Chrysler Sebring, 2001-07 Dodge Caravan SE, 2002-05 Dodge Ram, 2000-06 GMC Yukon XL, 2004-07 Pontiac Grand Prix.

Customer Reviews ::

Daughter hates it... I love it! - C. Miller - Wisconsin
The safe Driving Monitor does everything it says it will. It is helping my daughter, who has a lead foot, to be more responsible while driving. I have to say that the customer service department is one of the best I have EVER delt with. I had a problem with the monitor working in my daughters car and the help I received was well above and beyond normal service! They sent me a modified sensor, free of charge, that would work in my daughters car and told me to keep the orginal one incase the modified sensor did not work in other cars. (for future use) I am very happy with this product...and even happier with the customer service department! It may not solve all teen driving issues but it does make them more aware.

1990 CHEVROLET CORVETTE Owners Manual User Guide

Product Details

Also called an operating manual, this book acquaints the owner with the operating controls of the vehicle, recommends certain maintenance & minor service procedures, includes brief specifications & capacities.

• Factory Authorized Reproduction
• Corvette
• approx 400 pages
• 5 x 7
• Glovebox Manual

Customer Reviews ::

A1 Cardone 19-B1826 Remanufactured Brake Caliper

Product Details

A1 Cardone Brake Calipers are designed to render astounding performance. These calipers deliver the surefire control and strength required to stop the vehicle instantly. They pin down hard on the rotors so as to obtain intense power. These facilitate easy installation and are backed by a limited life time warranty.

• Designed to render astounding performance
• Delivers the surefire control and strength required to stop the vehicle instantly
• Depends on the rotors to obtain intense power
• Facilitates easy installation
• Backed by a limited life time warranty

Customer Reviews ::

A1 Cardone 19-1849 Remanufactured Brake Caliper

Product Details

A1 Cardone Brake Calipers are designed to render astounding performance. These calipers deliver the surefire control and strength required to stop the vehicle instantly. They pin down hard on the rotors so as to obtain intense power. These facilitate easy installation and are backed by a limited life time warranty.

• Designed to render astounding performance
• Delivers the surefire control and strength required to stop the vehicle instantly
• Depends on the rotors to obtain intense power
• Facilitates easy installation
• Backed by a limited life time warranty

Customer Reviews ::

A1 Cardone 16-4687 Remanufactured Brake Caliper

Product Details

A1 Cardone Brake Calipers are designed to render astounding performance. These calipers deliver the surefire control and strength required to stop the vehicle instantly. They pin down hard on the rotors so as to obtain intense power. These facilitate easy installation and are backed by a limited life time warranty.

• Designed to render astounding performance
• Delivers the surefire control and strength required to stop the vehicle instantly
• Depends on the rotors to obtain intense power
• Facilitates easy installation
• Backed by a limited life time warranty

Customer Reviews ::

A1 Cardone 184178 Remanufactured Friction Choice Caliper

Product Details

A1 Cardone Friction Choice Calipers are designed to render reliable and excellent performance. These calipers feature extreme-endurance pads that are resistant to excessive heat and damage. They are computer tested and include constrained layer metal shims that eliminate noise. These facilitate easy installation and are backed by a one year warranty.

• Designed to render reliable and excellent performance
• Features extreme-endurance pads
• Resistant to excessive heat and damage
• Computer tested
• Backed by a limited life time warranty

Customer Reviews ::

A1 Cardone 19-B1339 Brake Caliper

Product Details

A1 Cardone Brake Calipers are designed to render astounding performance. These calipers deliver the surefire control and strength required to stop the vehicle instantly. They pin down hard on the rotors so as to obtain intense power. These facilitate easy installation and are backed by a limited life time warranty.

• Designed to render astounding performance
• Delivers the surefire control and strength required to stop the vehicle instantly
• Depends on the rotors to obtain intense power
• Facilitates easy installation
• Backed by a limited life time warranty

Customer Reviews ::

Raybestos RC3171 Loaded Brake Caliper

Product Details

Raybestos Loaded Brake Caliper is designed to maximize performance and increase durability. This caliper features a corrosion resistant high-temperature synthetic lubricant and improves trouble-free operation. It improves braking and ensures safe, leak-free performance.

• Designed to maximize performance and increase durability
• Ensures safe, leak-free performance
• Features a corrosion resistant high-temperature synthetic lubricant
• Improves trouble-free operation
• Includes professional grade premium disc brake pads

Customer Reviews ::

Save A Battery 1295 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter

Product Details

Save A Battery 12 Volt Battery Tester Alarm Monitor/Voltmeter can test all automotive electrical circuits and charging systems. It monitors battery condition and warns when the battery is low. This battery tester offers a modular design for versatile operation cables that can be changed quickly and easily. It makes it easy to connect cables with total versatility. This battery tester is lightweight, compact and easy to transport.

• Monitors battery condition and provides an audible warning when the battery is low
• Load tester can cycle weak batteries, bringing them back to life
• On-board voltmeter tests multiple automotive electrical parts and systems
• Unique modular cable design offers a variety of connectors and lengths, and can be changed quickly and easily
• Lightweight, compact and easy to transport

The Save A Battery 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter is an affordable solution for battery monitoring, rejuvenating, and testing. It can test all automotive electrical circuits and charging systems, and can monitor your battery's condition. When the device detects low battery voltage, the built-in alarm will alert you to its status. It's even equipped with an on-board load tester that can help rejuvenate and condition a weak or dead battery. This compact unit is highly portable, and the innovative modular cord system makes it easy to connect with virtually any vehicle.

The Save A Battery is easy to read and operate.

Save Time and Money by Monitoring Your Battery's Status
It's a fact: batteries naturally discharge over time, even when not connected to a vehicle. If you own a classic car, RV, motorcycle, or any other vehicle that isn't used regularly, you may have experienced this first-hand. Not only is it frustrating, but a dead battery also costs you time and money to recharge or replace.

The Save A Battery 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter gives you real-time battery and electrical system information that is easy to read and understand. It doesn't even need to be plugged into a wall outlet to work. Simply attach it to your battery and the display will show you the information you need. The built-in audible alarm will alert you if the battery's charge gets too low, indicating that it is time to charge the battery.

The Save A Battery 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter can even help when it's time to charge your battery. It can be connected with any battery charger or maintainer, turning it into a smart battery monitoring and rejuvenating system. The built-in Load Tester provides a way to test and cycle weak batteries and bring them back to life. The on-board Voltmeter can also be used to diagnose in-car wiring and check the alternator, generator, or dynamo.

The modular design provides multiple connection options.

Safe and Easy to Set Up and Operate
The Save A Battery 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter comes equipped with numerous safety features and is a snap to set up and use. It won't cause sparks when you connect it to your vehicle, and will alert you if it has been connected in reverse polarity. Short-circuit protection is also included to keep you safe. The audible Low Voltage Alarm monitors battery voltage and will automatically sound before the battery is damaged by discharging too much. The large LCD screen and bright LEDs make it easy to monitor battery and electrical system status. The LCD display can even be turned off while charging or maintaining for long-term storage.

The Save A Battery 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter also features an innovative modular cable design that makes it easy to connect to any battery or vehicle. You can choose to connect with the 5-Amp battery terminal lug cable, or with the Voltmeter probe cable. Additional cables (sold separately) are also available and provide different connector options and lengths. All cables come with gold-plated connectors that are suited for long cable runs and improved reliability in harsh environments. The bright yellow cable jacket is also easy to see, and helps eliminate accidental disconnects.

What's in the Box?
The Save A Battery 12-Volt Battery Alarm Monitor with Load Tester and Voltmeter comes with a 6-foot 5-Amp battery terminal lug cable, a 3-foot Voltmeter probe cable, and a mounting bracket for permanent wall or vehicle installation.

Customer Reviews ::